Configuring Cross Reference Settings

Introduction

You can configure the following settings in the Cross Reference settings tab:

Enable IntelliLink	Enable Link Zoom/Pan
Propagate Zoom and Relative W/L	Reference Lines
Enable IntelliScroll

Path

User Settings > Image Display > Cross Reference

Steps

1. Modify the following settings as needed.
2. When you have finished configuring all settings, click Close to apply and save setting changes.

Enable IntelliLink Settings

If a study does not have a Frame of Reference (FOR), IntelliLink is not available. For additional information, see IntelliLink Overview.

Setting	Description
Enable IntelliLink (CT/PET/MR)	If enabled, IntelliLink is automatically available when you open a CT, PT, or MR study with the same FOR. This setting is disabled by default.

Propagate Zoom and Relative W/L Settings

Setting	Description
Propagate zoom and relative W/L to all images	If enabled, Synapse propagates zoom and relative Window Level to all images. This setting is disabled by default.

Top

Enable IntelliScroll Settings

Synapse supports IntelliScroll for all modality types. In User Settings, you can enable BT, CT, PET, and MR to be on by default. For additional information, see:

• IntelliScroll Overview
• Enabling IntelliScroll

Note:

Synapse supports IntelliScroll across tomosynthesis series for MG studies. For 2D series within MG studies, Synapse supports IntellliScroll Sync by Prior.

Setting	Description
Enable IntelliScroll for	Select or remove one or more of the following options: BT CT PET MR MG CT, PET, MR, and MG are the default settings.

Top

Enable Link Zoom/Pan Settings

When enabled, Link Zoom/Pan displays all of the linked images with the same physical size panned to the same location. For additional information, see:

• Link Zoom Pan Overview
• Using Pan
• Using Zoom

Setting	Description
Enable Link/Zoom/Pan for	Select one of the following options: MG (default) CT PET MR
Link different view orientations	If enabled, Synapse links different view orientations (sagittal, axial, coronal, and oblique) when Link Zoom Pan is used. If disabled, the same orientation is used for Link Zoom Pan. Only images with the same orientation zoom and pan together. This option is enabled by default.

Top

Reference Lines Settings

Reference lines show relationships between images in different series. Reference lines are automatically displayed when you open a CT, PT, or MR study.

If you manually change the default display option from the context menu, when you close the Viewer, Synapse reverts to the default option.

For additional information, see:

• Reference Lines Overview
• Using Reference Lines
• Reference Lines and Localizers

Setting	Description
Reference Lines	Use this setting to display and dynamically update reference lines during dynamic scrolling, middle mouse flythrough, and cine. Select Display reference lines during scrolling and cine. Note: When this setting is enabled, scrolling performance could be impacted.
	Use this setting to change the default Reference Lines setting. Select one of the following options: None Single First and last (default)

Results

Synapse displays the following message to alert you that an action must be taken to apply the settings: Refresh the Synapse browser window to apply the changes.

Top